Debugger.Memory

The Debugger API can help tools observe the debuggee’s memory use in various ways:

  • It can mark each new object with the JavaScript call stack at which it was allocated.

  • It can log all object allocations, yielding a stream of JavaScript call stacks at which allocations have occurred.

  • It can compute a census of items belonging to the debuggee, categorizing items in various ways, and yielding item counts.

If dbg is a Debugger instance, then the methods and accessor properties of dbg.memory control how dbg observes its debuggees’ memory use. The dbg.memory object is an instance of Debugger.Memory; its inherited accessors and methods are described below.

Allocation Site Tracking

The JavaScript engine marks each new object with the call stack at which it was allocated, if:

Given a Debugger.Object instance dobj referring to some object, dobj.allocationSite returns a saved call stack indicating where dobj’s referent was allocated.

Allocation Logging

If dbg is a Debugger instance, and dbg.memory.trackingAllocationSites is set to true, then the JavaScript engine logs each object allocated by dbg’s debuggee code. You can retrieve the current log by calling dbg.memory.drainAllocationsLog. You can control the limit on the log’s size by setting dbg.memory.maxAllocationsLogLength.

Censuses

A census is a complete traversal of the graph of all reachable memory items belonging to a particular Debugger‘s debuggees. It produces a count of those items, broken down by various criteria. If dbg is a Debugger instance, you can call dbg.memory.takeCensus to conduct a census of its debuggees’ possessions.

Accessor Properties of the Debugger.Memory.prototype Object

If dbg is a Debugger instance, then dbg.memory is a Debugger.Memory instance, which inherits the following accessor properties from its prototype:

trackingAllocationSites

A boolean value indicating whether this Debugger.Memory instance is capturing the JavaScript execution stack when each Object is allocated. This accessor property has both a getter and setter: assigning to it enables or disables the allocation site tracking. Reading the accessor produces true if the Debugger is capturing stacks for Object allocations, and false otherwise. Allocation site tracking is initially disabled in a new Debugger.

Assignment is fallible: if the Debugger cannot track allocation sites, it throws an Error instance.

You can retrieve the allocation site for a given object with the Debugger.Object.prototype.allocationSite accessor property.

allocationSamplingProbability

A number between 0 and 1 that indicates the probability with which each new allocation should be entered into the allocations log. 0 is equivalent to “never”, 1 is “always”, and .05 would be “one out of twenty”.

The default is 1, or logging every allocation.

Note that in the presence of multiple Debugger instances observing the same allocations within a global’s scope, the maximum allocationSamplingProbability of all the Debugger is used.

maxAllocationsLogLength

The maximum number of allocation sites to accumulate in the allocations log at a time. This accessor can be both fetched and stored to. Its default value is 5000.

allocationsLogOverflowed

Returns true if there have been more than [maxAllocationsLogLength][#max-alloc-log] allocations since the last time [drainAllocationsLog][#drain-alloc-log] was called and some data has been lost. Returns false otherwise.

Debugger.Memory Handler Functions

Similar to Debugger’s handler functions, Debugger.Memory inherits accessor properties that store handler functions for SpiderMonkey to call when given events occur in debuggee code.

Unlike Debugger‘s hooks, Debugger.Memory’s handlers’ return values are not significant, and are ignored. The handler functions receive the Debugger.Memory’s owning Debugger instance as their this value. The owning Debugger’s uncaughtExceptionHandler is still fired for errors thrown in Debugger.Memory hooks.

On a new Debugger.Memory instance, each of these properties is initially undefined. Any value assigned to a debugging handler must be either a function or undefined; otherwise a TypeError is thrown.

Handler functions run in the same thread in which the event occurred. They run in the compartment to which they belong, not in a debuggee compartment.

onGarbageCollection(statistics)

A garbage collection cycle spanning one or more debuggees has just been completed.

The statistics parameter is an object containing information about the GC cycle. It has the following properties:

collections

The collections property’s value is an array. Because SpiderMonkey’s collector is incremental, a full collection cycle may consist of multiple discrete collection slices with the JS mutator running interleaved. For each collection slice that occurred, there is an entry in the collections array with the following form:

{
  "startTimestamp": timestamp,
  "endTimestamp": timestamp,
}

Here the timestamp values are timestamps of the GC slice’s start and end events.

reason

A very short string describing the reason why the collection was triggered. Known values include the following:

  • “API”

  • “EAGER_ALLOC_TRIGGER”

  • “DESTROY_RUNTIME”

  • “LAST_DITCH”

  • “TOO_MUCH_MALLOC”

  • “ALLOC_TRIGGER”

  • “DEBUG_GC”

  • “COMPARTMENT_REVIVED”

  • “RESET”

  • “OUT_OF_NURSERY”

  • “EVICT_NURSERY”

  • “FULL_STORE_BUFFER”

  • “SHARED_MEMORY_LIMIT”

  • “PERIODIC_FULL_GC”

  • “INCREMENTAL_TOO_SLOW”

  • “DOM_WINDOW_UTILS”

  • “COMPONENT_UTILS”

  • “MEM_PRESSURE”

  • “CC_WAITING”

  • “CC_FORCED”

  • “LOAD_END”

  • “PAGE_HIDE”

  • “NSJSCONTEXT_DESTROY”

  • “SET_NEW_DOCUMENT”

  • “SET_DOC_SHELL”

  • “DOM_UTILS”

  • “DOM_IPC”

  • “DOM_WORKER”

  • “INTER_SLICE_GC”

  • “REFRESH_FRAME”

  • “FULL_GC_TIMER”

  • “SHUTDOWN_CC”

  • “USER_INACTIVE”

nonincrementalReason

If SpiderMonkey’s collector determined it could not incrementally collect garbage, and had to do a full GC all at once, this is a short string describing the reason it determined the full GC was necessary. Otherwise, null is returned. Known values include the following:

  • “GC mode”

  • “malloc bytes trigger”

  • “allocation trigger”

  • “requested”

gcCycleNumber

The GC cycle’s “number”. Does not correspond to the number of GC cycles that have run, but is guaranteed to be monotonically increasing.

Function Properties of the Debugger.Memory.prototype Object

Memory Use Analysis Exposes Implementation Details

Memory analysis may yield surprising results, because browser implementation details that are transparent to content JavaScript often have visible effects on memory consumption. Web developers need to know their pages’ actual memory consumption on real browsers, so it is correct for the tool to expose these behaviors, as long as it is done in a way that helps developers make decisions about their own code.

This section covers some areas where Firefox’s actual behavior deviates from what one might expect from the specified behavior of the web platform.

Objects

SpiderMonkey objects usually use less memory than the naïve “table of properties with attributes” model would suggest. For example, it is typical for many objects to have identical sets of properties, with only the properties’ values varying from one object to the next. To take advantage of this regularity, SpiderMonkey objects with identical sets of properties may share their property metadata; only property values are stored directly in the object.

Array objects may also be optimized, if the set of live indices is dense.

Strings

SpiderMonkey has three representations of strings:

  • Normal: the string’s text is counted in its size.

  • Substring: the string is a substring of some other string, and points to that string for its storage. This representation may result in a small string retaining a very large string. However, the memory consumed by the string itself is a small constant independent of its size, since it is a reference to the larger string, a start position, and a length.

  • Concatenations: When asked to concatenate two strings, SpiderMonkey may elect to delay copying the strings’ data, and represent the result as a pointer to the two original strings. Again, such a string retains other strings, but the memory consumed by the string itself is a small constant independent of its size, since it is a pair of pointers.

SpiderMonkey converts strings from the more complex representations to the simpler ones when it pleases. Such conversions usually increase memory consumption.

SpiderMonkey shares some strings amongst all web pages and browser JS. These shared strings, called atoms, are not included in censuses’ string counts.

Scripts

SpiderMonkey has a complex, hybrid representation of JavaScript code. There are four representations kept in memory:

  • Source code. SpiderMonkey retains a copy of most JavaScript source code.

  • Compressed source code. SpiderMonkey compresses JavaScript source code, and de-compresses it on demand. Heuristics determine how long to retain the uncompressed code.

  • Bytecode. This is SpiderMonkey’s parsed representation of JavaScript. Bytecode can be interpreted directly, or used as input to a just-in-time compiler. Source is parsed into bytecode on demand; functions that are never called are never parsed.

  • Machine code. SpiderMonkey includes several just-in-time compilers, each of which translates JavaScript source or bytecode to machine code. Heuristics determine which code to compile, and which compiler to use. Machine code may be dropped in response to memory pressure, and regenerated as needed.

Furthermore, SpiderMonkey tracks which types of values have appeared in variables and object properties. This type information can be large.

In a census, all the various forms of JavaScript code are placed in the "script" category. Type information is accounted to the "types" category.

Source Metadata

Generated from file:

js/src/doc/Debugger/Debugger.Memory.md

Watermark:

sha256:2c1529d6932efec8c624a6f1f366b09cb7fce625a6468657fab81788240bc7ae

Changeset:

e91b2c85aacd